Water-Clear Slow-Cast Epoxy Kits
Water-clear slow-cast epoxy kits in two sizes.
Interested in this product?
Contact us for pricing and ordering.
FGCI142379
Size / format 1.5 gal kit
Minimum 1 EACH
About this product
Brand: FPR
Epoxy based resin system made for deep pour applications. Use this resin when using a mold to create a piece thicker than 0.5in.
Follow the selected system instructions for mixing, pour thickness and cure conditions.
Before you choose
Resin will take longer to cure. Precise mixing is vital for correct curing.
A slow-cast epoxy system for casting work
This family contains complete water-clear slow-cast epoxy kits. The source identifies the resin system for deep-pour applications and notes that it cures more slowly than a general coating resin. It is kept separate from clear tabletop and art-coating epoxies.
Select a casting system around the planned mold and section thickness, not just the word clear. A larger casting creates different processing demands from a thin surface coating.
Choose a 1.5- or 3-gallon kit
The available kits are labeled 1.5 gallons and 3 gallons. Estimate the project volume using the manufacturer guidance and allow for test pieces and handling losses. Kit volume describes the supplied system, not the maximum amount that can be mixed or poured in one batch.
Check that you are selecting a complete kit rather than a single replacement component. The product row above identifies the actual package to be ordered.
Verify mixing and pour limits for the exact system
The reviewed system lists a 2:1 mix ratio. Confirm the measurement basis and current instructions before use; do not assume a volume ratio is interchangeable with a weight ratio. Follow the specified limits for pour thickness, batch size and cure conditions. For a Puerto Rico inquiry, share the casting dimensions and kit choice with FPR so the relevant technical information can be identified.